Great customer service - they rang me to tell me exactly when my bbq was coming, they also sent over the instructions and price honoured me. 10/10.
Can You Put an Outdoor Fireplace on a Deck?

Short answer: Not directly on the boards. Ochre Living's instructions say its fireplaces should not be built directly onto decking and recommend a reinforced concrete base at least 100 mm thick, while Buschbeck allows a timber deck on conditions that include carrying more than 600 kg over the footprint. Whether a particular deck can is a question for a structural engineer.
If the deck is the only flat ground you have, the options further down show how a fireplace can sit beside it instead, which keeps the weight off the timber. If the aim is simply a fire on the deck, a fire table is the usual answer; deck guides for those are linked below.
What do the makers say about decks?
Both makers address the question directly, but neither recommendation amounts to a plain yes. The table summarises what each had published when their documents were read on 9 October 2026.
| Maker | Guidance on decking | Source |
|---|---|---|
| Ochre Living | Build on a firm foundation, not directly onto decking; recommended base is reinforced concrete at least 100 mm thick | Hotham installation instructions |
| Buschbeck | A timber deck is possible if it carries more than 600 kg over the footprint, with fireproof material under and around it | Buschbeck FAQ |
Ochre's own documents differ in emphasis. Its FAQ answers the timber deck question with a yes but recommends pouring a concrete footing at the fireplace position, while the Ossa, Hotham and Perisher instructions say not to build directly onto decking. Read together, the documents agree that a concrete foundation, rather than the decking, must carry the structure.
Ochre does not specify whether that footing sits in the ground beneath a cut-out in the deck or on the deck framing. The distinction matters, because the first transfers the weight away from the boards whereas the second remains a structural engineering job.
Buschbeck's pages also pull in two directions. The FAQ allows a deck on three conditions, but the assembly instructions say to keep the fireplace at least 1.5 m from flammable materials and name wooden patios and porches among them. Until Buschbeck clarifies the discrepancy in writing, the stricter instruction is the safer interpretation.
How heavy is an outdoor fireplace?
Heavy enough that the answer begins with the footing and the structure beneath it rather than with the view. The weights below come from Ochre's spec sheets and from Buschbeck's own pages for the Rondo and St Moritz.
| Fireplace | Weight (maker) | Clearance to combustibles (maker) |
|---|---|---|
| Ochre Living Ossa | 460 kg | 100 mm |
| Ochre Living Hotham | 960 kg | 75 mm |
| Ochre Living Perisher | 1,100 kg | 75 mm |
| Buschbeck Rondo | about 510 kg | 1.5 m |
| Buschbeck St Moritz | about 440 kg | 1.5 m |
The Hotham and the Perisher both exceed the 600 kg that Buschbeck names as its own deck requirement, although the two makers' units differ in footprint, so the comparison indicates scale rather than a pass mark.
A deck is designed for a set load, not for whatever is later placed on it. The timber industry's WoodSolutions deck guide, resourced by Forest and Wood Products Australia, says its light domestic design covers average housing loads and that a deck taking heavier loads such as tiles, spas or vehicles needs a structural engineer. Victoria's Building and Plumbing Commission adds that a deck design allows for a maximum number of people and a maximum weight of features such as furniture. It also warns that heavy items add loads a deck may not have been designed for and that an overloaded deck may collapse.
On our reading, a masonry fireplace of 460 to 1,100 kg is a heavy item of that kind, although neither source names one. That is why we will not quote a safe weight for any particular deck: an engineer or the builder has to confirm it.
How far should a fireplace sit from decking?
Each maker sets a minimum distance to wood and other combustible material: 100 mm for the Ossa, 75 mm for the Hotham and Perisher and 1.5 m for the Buschbeck units. Boards and joists all count as wood, so a footing set into a deck needs the surrounding timber trimmed back at least that far, which changes the layout as well as the foundation. Buschbeck publishes assembly instructions for the Rondo and the St Moritz.
What can you do instead of building on the deck?
Picture a merbau deck behind a brick home, with a Hotham planned for the sunny corner. At 960 kg it is well over Buschbeck's 600 kg test; the 75 mm clearance also means the boards around it would need cutting back, so the realistic plan is a separate slab at the deck's edge.
Ochre asks for a reinforced slab at least 100 mm thick and at least 150 mm wider than the fireplace on all four sides. That works out to 985 by 740 mm for the Ossa, 1,390 by 940 mm for the Hotham and 1,630 by 940 mm for the Perisher, with the decking kept back by the clearances above. The result is a fireplace to sit beside from the deck, on a base that carries it. Once it is built, the guide to how long to wait before lighting it covers the first fires.
The other routes are a footing through the deck, designed by an engineer, or a fire that suits decking in the first place. Guides to a fire table on a deck, a fire table near a deck railing and a fire pit on a deck cover those. The fire tables collection holds the range.
If the deck is the only option and pouring concrete is out of the question, a masonry fireplace is the wrong product, so we would rather say so before an order is placed.
Do approvals and fire bans apply on a deck?
Ochre says permits are not required in most cases but asks owners to check with their council or shire. The guide to council approval for an outdoor fireplace covers the detail. Strata and balcony installations are a matter for the owners corporation, which we cannot speak for.
A deck is no exception to a Total Fire Ban. The NSW Rural Fire Service says that during a Total Fire Ban nobody may light, maintain or use a fire in the open. A barbeque or wood-fired pizza oven using solid fuel also cannot be used outside, so check your own state's rule before you light.
Ring me on 03 7073 2116 before you order and I will tell you whether the Ossa, Hotham or Perisher suits your space, even when that means a smaller fireplace. Every kit in the Outdoor Fireplaces collection carries our price-beat promise and a check-in within a week of delivery. We also handle any warranty claim with the maker for you.
You May Also Like:
- How to Build an Outdoor Fireplace: An Australian Buyer's Guide
- How Much Does an Outdoor Fireplace Cost in Australia?
- How Long Before You Can Light a New Outdoor Fireplace?
- Can You Put a Fire Pit on a Deck? What's Safe in Australia
- Do You Need Council Approval for an Outdoor Fireplace?
- Outdoor Fireplaces collection
More in Outdoor Fireplaces
See all 18 guides-
Outdoor Fireplaces
Why Is My Outdoor Fireplace Smoking?
The causes of a smoking outdoor fireplace in the order to check them: wet wood, an overloaded fire, a cold chimney, wind and roofline, and stack height, with the maker and EPA advice that applies. -
Outdoor Fireplaces
How to Store Firewood Outside
How owners of a wood fireplace should store firewood outside: where to put it, how to stack and cover it, how long it takes to season, how to test it and what changes in fire season. -
Outdoor Fireplaces
How Long Before You Can Light a New Outdoor Fireplace?
The makers' own first-fire guidance for Ochre Living and Buschbeck fireplaces: how long to wait, how to light the first fires, why forums say 28 days, and which cracks are normal.















