Revolvashade Signature Range Cantilever Umbrella
Buyers who want to choose their own frame, canopy colour and size
Renovators wanting one base, no re-siting
Households that want the canopy up and down without a fight
Revolvashade · Cantilever Umbrellas
The owner's insights on the Signature Range
The Signature Range is the Revolvashade umbrella you design yourself: frame colour, canopy colour and size. The 3.2m is tested to 92.5km/h. Revolvashade call their wind ratings breaking points. Close the umbrella whenever you are not using it. Take it down well before gusts get near the rating.
What you notice once it's up is the winding: Revolvashade builds these on a patented seatbelt mechanism, seatbelt webbing instead of the steel wire most cantilevers use. Steel wire seizes and rusts inside the mast over a few seasons near the coast; webbing doesn't.
The 360° rotation lets you walk the shade around a table through the afternoon without touching the base.
It's a heavy, permanent piece: the frame alone runs to about 65kg. If you want something you can fold flat and move indoors overnight, this isn't that umbrella; if you want one that stays bolted down and simply works for years, it is.
Why you'll love the Signature Range
Opens without a fight, every time
The seatbelt winding mechanism doesn't rust or seize the way steel wire winders do, so it stays smooth and near-silent well past the first few seasons.
Tested wind ratings by size
The 3.2m size is tested to 92.5km/h. Every larger size is tested too, with the rating stepping down as the canopy gets bigger. Revolvashade call these breaking points, so close the umbrella when it is not in use.
Rotates without moving a chair
Full 360° rotation around a fixed mast, so shade follows the sun without you shifting a single seat underneath.
Frame and canopy colour, your call
Three frame colours and four standard canopy colours shown here, so the umbrella matches your own palette, not ours.
Base, cover and handle included
Your price includes a base, a storage cover and the handle, so there's nothing extra to source before it's usable.
Built and tested in one factory
Revolvashade cuts, sews and welds every Signature Range umbrella at its own Gold Coast factory, then function-tests each one on a base before it's boxed.
Why you should consider a Revolvashade cantilever umbrella
Revolvashade has been building cantilever umbrellas on the Gold Coast for more than 30 years and cuts, sews and welds every canopy and frame in its own factory, no subcontractors. Each unit goes up on a test base, gets inspected and function tested, then is boxed for delivery. Buy yours through My Acre, with freight priced by state and shown before you pay. Call us to confirm delivery for your address. If a warranty question ever comes up, you deal with us, not the maker.
Talk it through before you buy
Call the team. We'll help you match the size, base and colour to your deck, pool or courtyard.
Call todaySignature Range specifications
| Type | Rotating cantilever umbrella, single tilt as standard, double tilt available on the 3.6m, 4.0m and 4.5m Octagonal (choose it with your size) |
|---|---|
| Shapes | Octagonal (3.2m to 5.0m), Square (3.2m, 3.6m) |
| Wind rating | 92.5km/h (3.2m and 3.6m), 81km/h (4.0m), 70km/h (4.5m), 60.5km/h (5.0m) |
| Frame | Marine-grade aluminium, 5mm-thick extruded profile, approx. 65kg, stainless steel fittings |
| Frame colours | Black, White, Silver, shown here |
| Canopy colours | Black, Charcoal, Navy and Stone shown here; Pewter, Silver (white), Sea Blue and Linen also available, plus striped and non-standard colours at a surcharge, all by phone |
| Fabric | Anti-fade, mould and mildew resistant, water repellent |
| Mechanism | Patented seatbelt winding mechanism (webbing, not steel wire), near-silent operation |
| Rotation | 360° around a fixed mast |
| Base included | Standard bolt-down or in-ground base (3.2m to 4.0m); large bolt-down base (4.5m, 5.0m) |
| Base upgrades | Extended in-ground +$140, standard stainless steel bolt-down +$210, large stainless steel bolt-down +$470, by phone |
| What's included | Fully assembled canopy and frame, one base, storage cover, handle |
| Warranty | 10-year canopy warranty, lifetime frame warranty |
| Made in | Australia, built in-house at Revolvashade's Gold Coast factory |
| Delivery | Priced by state and shown before you pay |
What's included with your Signature Range umbrella
- Fully assembled canopy and frame, ready to bolt down or set in the ground
- One base: standard bolt-down or in-ground base at 3.2m to 4.0m, a large bolt-down base at 4.5m and 5.0m
- A premium storage cover, fitted to keep the canopy clean between uses
- The winding handle
Choosing a base
Every Signature Range umbrella comes with one base included. Pick the one that suits your surface, then call us for a stainless steel upgrade if you want it.
Standard bolt-down base
Bolts straight onto existing paving, concrete or decking. Included at 3.2m to 4.0m.
Standard in-ground base
Sets into fresh concrete for a permanent, low-profile fixing. Included at 3.2m to 4.0m.
Large bolt-down base
A heavier base for the bigger canopies. Included at 4.5m and 5.0m.
Stainless steel upgrade
Standard or large bolt-down base in stainless steel, a phone-ordered upgrade over the standard finish.
Sizing the Signature Range for your space
The canopy span (A) is the figure worth measuring your space against. The mast reaches out a constant 240mm further than the canopy edge (B) at every size; it stands 2,980mm tall. Clearance under the canopy (D) holds at 2,110mm whether you choose the 3.2m or the 5.0m; only the mast height (C) grows, from 3,240mm up to 3,570mm at 4.5m. Square shares the same 3.2m and 3.6m positions as Octagonal.
| Size | 3.2m | 3.6m | 4.0m | 4.5m | 5.0m |
|---|---|---|---|---|---|
| Canopy span (A) | 3,200mm | 3,600mm | 4,000mm | 4,500mm | 5,000mm |
| Mast to canopy edge (B) | 3,440mm | 3,840mm | 4,240mm | 4,740mm | 5,240mm |
| Mast height (C) | 3,240mm | 3,240mm | 3,410mm | 3,570mm | 3,510mm |
| Clearance under canopy (D) | 2,110mm | 2,110mm | 2,110mm | 2,110mm | 2,110mm |
Frequently asked questions
What wind rating does the Signature Range have?
It depends on size. The 3.2m and 3.6m are tested to 92.5km/h, the 4.0m to 81km/h, the 4.5m to 70km/h and the 5.0m to 60.5km/h. Revolvashade call these ratings breaking points. Do not leave the umbrella up when gusts approach the rating. Close it whenever you are not using it.
What's included in the price?
Your fully assembled canopy and frame, one base (bolt-down or in-ground, or a large bolt-down base on the 4.5m and 5.0m), a storage cover and the winding handle.
Which base do I need?
A standard bolt-down base suits existing paving, concrete or decking. A standard in-ground base sets into fresh concrete for a permanent fixing. The 4.5m and 5.0m sizes take a larger bolt-down base instead, included at that size. Stainless steel bases are available as a phone-ordered upgrade.
Is double tilt worth it?
Double tilt lets the already tilted canopy move left or right to block the moving sun. Choose it when you pick your size, on the 3.6m, 4.0m and 4.5m Octagonal. It adds $500 on the 3.6m and $400 on the 4.0m and 4.5m. The Square shapes and the 3.2m and 5.0m Octagonal are single tilt only.
Can I get a colour not shown here?
Yes. Black, Charcoal, Navy and Stone canopies and Black, White and Silver frames are shown on this page. Pewter, Silver (white), Sea Blue and Linen canopies, plus striped and fully custom colours, are available by phone at a surcharge.
Where is the Signature Range made?
Every Signature Range umbrella is cut, sewn and welded in Revolvashade's own factory on the Gold Coast, then put up on a test base and function tested before it's boxed.
What warranty do I get?
A 10-year warranty on the canopy and a lifetime warranty on the frame.
Compare with similar
Revolvashade Signature Range Cantilever Umbrella
Australian-made, seatbelt winding mechanism, tested to 92.5km/h on the compact sizes, four canopy and three frame colours shown here.
Best for choosing your own frame, canopy colour and size
Revolvashade Designer Collection Cantilever Umbrella
Same Australian-made build in a white frame with retro-inspired striped valances, single tilt as standard.
Best for a statement colour combination
Shadowspec Serenity Cantilever Umbrella
New Zealand-made with a gas-strut lift and 16 preset rotation positions, backed by FernMark accreditation.
Best if a gas-strut lift and FernMark provenance matter more to you than an Australian-made frame
Downloads
Bring the Signature Range home
Freight is priced by state and shown before you pay. We confirm delivery for your address before it ships. We also handle your warranty for you, so you deal with us, never the factory.
Speak to the team











