Elevate PondGard EPDM Pond Liner, Cut to Size
The same 1.14 mm PondGard EPDM the trade uses, supplied at a working length instead of the thirty metre roll it comes off.
Choose your width, then your length. We cut a single continuous piece, so there is no seam to fail.
Choosing your size
Take your pond's longest dimension, add twice the depth, then allow half a metre at each edge for the overlap you tuck under the capping stones. That total is the length you need. Round up rather than down; an offcut costs far less than a short liner.
Delivery
On the 3.05 m, 4.57 m and 6.10 m widths, delivery is $19 on the 6 m and 10 m lengths, then $129 on 15 m and 20 m. The wider pieces travel on a bigger truck: on 7.62 m and above it is $129 up to 10 m, then $199 on 15 m and 20 m. The exact figure shows at checkout before you pay.
Cut to size, or a full roll
These lengths cover most garden ponds, where a full roll would leave you paying for thirty metres to use ten. Above twenty metres the roll works out cheaper per metre, so compare the two before you order.
Need a length that is not listed
Call 1300 515 620 or send us your pond dimensions. We can cut to any length; these are simply the sizes most builds need.
Why PondGard over a cheaper liner
EPDM stays flexible at the temperature extremes that crack PVC, it carries no plasticisers to leach into the water, and is safe for fish from the day it goes in. At 1.14 mm it tolerates being dragged over gravel during a build, which is where most liner failures actually start.
Cut lengths are made to order, so they cannot be returned.
