Aquascape Curved Stacked Slate Spillway Wall Fountain Kit, 81cm
Gardens with young children, where open water is a problem
Renters and anyone who wants the feature to move house with them
Small spaces that cannot give up ground to a pond
Aquascape · Landscape Fountain Kits
The owner's insights on the Curved Spillway Wall Fountain Kit
This is the only piece in the range that reads as architecture rather than as an object. It sits against a wall or a boundary and behaves like a built water wall, which is what people usually want in a narrow courtyard where a freestanding piece would obstruct the space.
Three separate outlets across the top is the detail that matters. Each is fed by its own length of tubing, so you can balance them independently. One feed across a wide spillway always favours the centre and leaves the ends dry; three feeds give you an even curtain.
It runs an Ultra 8000, the largest pump on any fountain in this range, into a 370 litre AquaBasin 45. That is a lot of water moving over a wide face. It is the loudest piece here, so it is the one to choose if you are covering genuine traffic noise.
The curve is functional as well as visual. A curved face throws sound outward across a space rather than straight back at the wall behind it, which is why it works in a courtyard where a flat panel would sound harsh.
How a self-contained fountain actually works
It is a closed loop with half of it buried. The same water circulates continuously. Nothing ever stands in an open pond, which is the whole point of the format.
- 1A reservoir goes in the groundYou dig a shallow hole and drop the basin in. It holds the water and carries the weight of the piece above it.
- 2The pump sits inside itOut of sight, out of the weather, and reachable through the lid whenever it needs a clean.
- 3Water rises through the featureUp a short length of tubing, then out over the stone.
- 4It drains straight back downThrough the pebble and into the reservoir. You top it up occasionally rather than plumbing it in.
Why you'll love the Curved Spillway Wall Fountain Kit
It looks built, not placed
Against a wall or a boundary it reads as architecture. Nothing obstructs the middle of a narrow courtyard.
Three balanced outlets
Each fed separately, so you get an even curtain instead of a strong centre and dry ends.
The loudest in the range
An Ultra 8000 over a wide face. This is the one that genuinely covers road noise.
The curve does real work
It throws sound outward across the space rather than bouncing it back off the wall behind.
Ages like stone
Stacked slate texture on a durable composite. It weathers rather than fading.
No open water
370 litres of reservoir, all of it sealed below a grate.
Why you should consider an Aquascape water feature
Aquascape originated the pondless format and holds the Pondless® trademark. The Australian arm operates from Queensland with a certified installer network behind it. Order through My Acre and we will beat any genuine like-for-like price you find elsewhere. If a warranty question ever comes up, you deal with us, not the maker.
Not sure which one suits the spot?
Send us a photo of where it is going and the rough dimensions. We will tell you which piece works there and which one will not, before you spend anything.
Call todayCurved Spillway Wall Fountain Kit specifications
| Type | Wall-mounted spillway fountain with a sub-surface reservoir |
|---|---|
| Height | 81 cm |
| Outlets | Three, each independently fed |
| Material | Fibreglass-resin composite, stacked slate texture |
| Reservoir | AquaBasin 45 holding 370 L |
| Pump | Ultra 8000 |
| Weight | Approximately 75 kg |
| Open water | None. Reservoir is sealed below a grate |
| Power | Mains, weatherproof outdoor outlet required |
| Pebble | Not included |
| SKU | 78269 |
What is included and what you supply
The wall, the reservoir, the pump and three separate tubing runs for the three outlets.
In the box:
- 81cm Curved Stacked Slate Spillway Wall
- AquaBasin 45 sub-surface reservoir with grate
- Ultra 8000 water pump
- Three sections of fountain tubing, one per outlet
- Fittings
- Installation instructions
You supply:
- Decorative pebble to dress the top of the reservoir
- A weatherproof outdoor power point within reach of the pump lead
- The excavation, which is shallow compared with a pond
- A level, compacted base under the basin
Frequently asked questions
Is there any open water?
No. The only water you see is the film moving over the feature itself. Everything else sits below ground inside a sealed basin under a grate, so there is nothing for a child to step into.
Does it need a wall behind it?
It is designed to sit against one and looks best that way. It is not structurally dependent on the wall, so it can stand free if the position calls for it, though the back face is not finished to be seen.
Why three outlets rather than one?
A single feed across a wide spillway always favours the centre, leaving the ends dry. Three independently fed outlets let you balance the flow so the whole face runs evenly.
How loud is it?
The loudest fountain in this range. An Ultra 8000 moving water over a wide face makes a genuine curtain of sound, which is why it is the usual choice for covering traffic noise.
How often do I top it up?
Through summer, roughly weekly. Evaporation is the only loss in a sealed system. A hot windy week takes more than a still one.
Does it need power?
Yes. The pump runs on mains power and needs a weatherproof outdoor power point within reach of the basin. Have a licensed electrician install one if you do not already have it.
What happens in winter?
Nothing, in most of Australia. Where you do get hard frost, shut the pump down and drain the feature so water cannot freeze inside it.
Can I move it later?
Yes, which is one of the real advantages over a pond. Drain it, lift the feature, dig out the basin and start again somewhere else. People do take these with them when they sell.
Compare with similar
Aquascape Curved Stacked Slate Spillway Wall Fountain Kit, 81cm
Three outlets across a curved 81cm wall, sheeting down a textured face.
Best against a boundary or a courtyard wall, where the feature should look built in
Aquascape Stacked Slate Urn Fountain Kit
A stacked-slate urn spilling down its own face, in two sizes.
Best for a courtyard or an entry bed that needs height without width
Aquascape Scalloped Urn Fountain Kit
A glazed-ceramic look with water sheeting over a scalloped profile.
Best for a formal garden, or beside a pool where the look needs to be tidy
Bring the Curved Spillway Wall home
Your price is beaten against any genuine like-for-like offer. We can organise a certified installer, work with your own landscaper, or set you up to install it yourself.
Speak to the team